-
BismuthFerrite SKPM Optoelectonics temp_control SSRM temperature controller AFM INSP Pinpoint AmplitudeModulation OpticalElement PolyvinylAcetate Granada align Piranha Floppy Permalloy Device Protein hard_disk Vinylpyridine SoftSample HexagonalBoronNitride STO SiWafer Writing LithiumNiobate EvatecAG SRAM IIT-chennai PhaseImaging Leakage Temperature TungstenThinFilmDeposition DomainSwitching NUS_NNI_Nanocore
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
ER 316L Stainless Steel
The ferrite MFM phase has a striped appearance due to its ferromagnetic behavior, while the paramagnetic austenite phase shows a uniform appearance.
Scanning Conditions
- System: NX20
- Scan Mode: AM-KPFM, MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 20μm×20μm
- Scan Rate: 0.3Hz
- Pixel Size: 512 × 512
- Lift height: 30nm
- Scan Mode: AM-KPFM, MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 20μm×20μm
- Scan Rate: 0.3Hz
- Pixel Size: 512 × 512
- Lift height: 30nm