-
atomic_steps exfoliate Led FAPbI3 Titanate FrequencyModulation PMNPT LowDensityPolyethylene Molybdenum_disulfide Leakage Yeditepe_University Vacuum dielectric trench Organic OxideLayer amplitude_modulation Lift PolymerBlend Permalloy Co/Cr/Pt temp_control Reduction TipBiasMode NUS_NNI_Nanocore Treatment Styrene TemperatureControl Sio2 Imprint NiFe thermal_property self_assembly Perovskite LateralPFM Copper
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Co coated surface
Scanning Conditions
- System: NX10
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 1μm×1μm
- Scan Rate: 0.7Hz
- Pixel: 512×256
- Lift height: 30nm
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 1μm×1μm
- Scan Rate: 0.7Hz
- Pixel: 512×256
- Lift height: 30nm