-
Water Defects Vacuum Ptfe SrTiO3 solar_cell Dr.JurekSadowski Aluminium_Oxide frequency_modulation Hole CancerCell Bmp aluminum_nitride silicon_carbide Nickel MfmAmplitude kelvin probe force microscopy IMT_Bucharest NUS TappingMode MfmPhase Chloroform PUR SmalScan Worcester_Polytechnic_Institute hard_disk_media Nanostructure Terrace Tin sulfide HiVacuum nanomechanical Regensburg DIWafer Temasek_Lab TempControl
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Lithography on Si substrate
Scanning Conditions
- System: NX10
- Scan Mode: Lithography
- Cantilever: ContscPt (k=0.2N/m, f=25kHz)
- Scan Size: 10μm×10μm
- Scan Rate: 1Hz
- Pixel: 1024×512
- Litho. mode: Tip bias mode
- Litho. Tip bias: Black -10V, White 0V