-
Nanofiber Foil GaP lift_mode PolyimideFilm Cobalt Phase Wildtype Indent Formamidinium_lead_iodide Dopped SKPM Hair Defects LiNbO3 Mechanical&nanotechnology Defect Granada biocompatible Conduct SrTiO3 HafniumDioxide plastic GlassTemp Ca10(PO4)6(OH)2 multi_layer mechanical property Biofilm HighAspect Adhesion Lift Sic LowDensityPolyethylene ScratchMode hydrocarbon
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Ferromagnetic Nanobars Array
Ferromagnetic nanobars arranged on a Penrose P2 tiling. The Permalloy (Ni81Fe19) nanobars are 810 nm and 500 nm long. The width and thickness of a nanobar amount to about 120 nm and 25 nm, respectively.
Scanning Conditions
- System: NX10
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 7μm×7μm
- Scan Rate: 1Hz
- Pixel Size: 512 × 512
- Lift height: 85nm
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 7μm×7μm
- Scan Rate: 1Hz
- Pixel Size: 512 × 512
- Lift height: 85nm