-
lithography FrictionalForceMicroscopy TungstenDeposition MagneticForceMicroscopy Nanostructure GlassTemp Chloroform I-VSpectroscopy Laser BlockCopolymer Mosfet Blend FAPbI3 Mapping DLaTGS Fendb Calcite Conductivity block_copolymer OpticalWaveguide 2-vinylpyridine cannabinoid Polytetrafluoroethylene Calcium AnodizedAluminumOxide light_emitting conductive food Insulator PS_PVAC Mobile Ni81Fe19 ItoGlass Pore SingleLayer
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Co coated surface
Scanning Conditions
- System: NX10
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 1μm×1μm
- Scan Rate: 0.7Hz
- Pixel: 512×256
- Lift height: 30nm
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 1μm×1μm
- Scan Rate: 0.7Hz
- Pixel: 512×256
- Lift height: 30nm