-
Croatia Calcium Kevlar ContactMode Photovoltaics I-VSpectroscopy Annealing Graphite Scratch OxideLayer StyreneBeads CalciumHydroxyapatite Edwin Permalloy DataStorage PtfeFilter Ferroelectric HighResolution Temasek_Lab Regensburg Biofilm Austenite Ceramic dielectric trench Hexatriacontane HexacontaneFilm Phosphide OpticalElement kelvin probe force microscopy CHRYSALIS_INC Graphene Semiconductor CrystalGrowing Workfunction ForceVolumeMapping
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Ferromagnetic Nanobars Array
Ferromagnetic nanobars arranged on a Penrose P2 tiling. The Permalloy (Ni81Fe19) nanobars are 810 nm and 500 nm long. The width and thickness of a nanobar amount to about 120 nm and 25 nm, respectively.
Scanning Conditions
- System: NX10
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 7μm×7μm
- Scan Rate: 1Hz
- Pixel Size: 512 × 512
- Lift height: 85nm
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 7μm×7μm
- Scan Rate: 1Hz
- Pixel Size: 512 × 512
- Lift height: 85nm