-
Polytetrafluoroethylene Wonseok Co/Cr/Pt AtomicLayer Reading Device LiquidCell LaAlO3 light_emitting Leakage ConductingPolymer Molybdenum_disulfide Oxidation Growth DomainSwitching Electrical&Electronics MechanicalProperty Step Iron Mechinical Microchannel Phase Biofilm tip_bias_mode NCM Reduction multi_layer OpticalWaveguide FastScan Copper ContactModeDots ForceVolumeMapping Imprint MoS2 Cross-section
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Formamidinium Lead Iodide FAPbI3 Perovskite Film
FAPbI3 is an organic-inorganic hybrid perovskite material for nowadays high efficiency perovskite solar cell.
Scanning Conditions
- System: NX10
- Scan Mode: Conductive AFM
- Cantilever: CDT-NCHR (k=80N/m, f=400kHz)
- Scan Size: 15μm×15μm
- Scan Rate: 0.5Hz
- Pixel Size: 512 × 256
- Scan Mode: Conductive AFM
- Cantilever: CDT-NCHR (k=80N/m, f=400kHz)
- Scan Size: 15μm×15μm
- Scan Rate: 0.5Hz
- Pixel Size: 512 × 256