-
Heat Terrace MultiLayerCeramicCapacitor Lateral_Force_Microscopy layers InsulatorFilm Change PolyStylene ContactModeDot Gong Regensburg Array ThermalProperties Sio2 PVAP3HT self_assembly Ram PetruPoni molecular_self_assembly Conductivity MetalCompound thermoplastic_elastomers ReflexLens Austenite Vortex AmplitudeModulation Cobalt SFAs HighAcpectRatio Zagreb CntFilm Subhajjit PiezoelectricForceMicroscopy non_contact ferromagnetic
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Self-assembly of Semi-fluorinated Alkanes
Domains formed by the self-assembly of semi-fluorinated alkanes deposited as a monolayer on the surface of the water. The monolayer was compressed before being transferred onto a silicon substrate. Each domain includes about 4000 molecules. The domains were easily detached from the substrate with tapping mode because the molecules were very loosely attached to the substrate. Only Non-contact mode could achieve this result.
Scanning Conditions
- System: NX10
- Scan Mode: Non-contact
- Cantilever: PPP-FMR (k=2.8N/m, f=75kHz)
- Scan Size: 1μm×1μm, 0.5μm×0.5μm, 0.2μm×0.2μm
- Scan Rate: 2Hz
- Pixel Size: 500 × 500
- Scan Mode: Non-contact
- Cantilever: PPP-FMR (k=2.8N/m, f=75kHz)
- Scan Size: 1μm×1μm, 0.5μm×0.5μm, 0.2μm×0.2μm
- Scan Rate: 2Hz
- Pixel Size: 500 × 500