-
neodymium_magnets NusEce phase_change Fendb Photovoltaics KAIST Mobile Silicon Litho layers PolyimideFilm LaAlO3 MonoLayer Friction AEAPDES Lanthanum_aluminate contact PMNPT LiftHeight Non-ContactMode Jason CeNSE_IISc Corrosion cross section ContactModeDot Tungsten Layer Subhajjit OpticalWaveguides DOE TungstenThinFilmDeposition HighAspect light_emission Cancer Insulator
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Co coated surface
Scanning Conditions
- System: NX10
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 1μm×1μm
- Scan Rate: 0.7Hz
- Pixel: 512×256
- Lift height: 30nm
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 1μm×1μm
- Scan Rate: 0.7Hz
- Pixel: 512×256
- Lift height: 30nm