-
CeNSE_IISc CaMnO3 LiquidCrystal Insulator lithography Film PhaseChange AM_KPFM epitaxy Imprint ScanningIon-ConductanceMicroscopy Platinum GalliumPhosphide Ram SolarCell Neodymium Bacterium PyroelectricDetector Heat ForceMapping Stiffness ThinFilm Annealing Polystyrene BreastCancerCell Conductive AFM DentalProsthesis LiBattery HardDiskMedia Protein INSPParis Pattern piezoelectric force microscopy CntFilm NanoLithography
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
ER 316L Stainless Steel
The ferrite MFM phase has a striped appearance due to its ferromagnetic behavior, while the paramagnetic austenite phase shows a uniform appearance.
Scanning Conditions
- System: NX20
- Scan Mode: AM-KPFM, MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 20μm×20μm
- Scan Rate: 0.3Hz
- Pixel Size: 512 × 512
- Lift height: 30nm
- Scan Mode: AM-KPFM, MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 20μm×20μm
- Scan Rate: 0.3Hz
- Pixel Size: 512 × 512
- Lift height: 30nm