-
light_emitting Chemical Vapor Deposition MESA structure StyreneBeads Etch CrossSection mfm_amplitude VortexCore FAPbI3 Co/Cr/Pt CrystalGrowing CBD Crystal oxide_layer Composition norganic LateralPFM DIWafer Dental DeoxyribonucleicAcid FM-KPFM MechanicalProperties Pvdf Growing PpLdpe Modulus Treatment Polyaniline Ceramics Adhesion ReflexLens Chromium plastics Mechinical NusEce
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Fe-Nd-B Alloy
Scanning Conditions
- System: NX10
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 15μm×15μm
- Scan Rate: 0.5Hz
- Pixel Size: 512 × 256
- Lift height: 100nm
- Scan Mode: MFM
- Cantilever: PPP-MFMR (k=2.8N/m, f=75kHz)
- Scan Size: 15μm×15μm
- Scan Rate: 0.5Hz
- Pixel Size: 512 × 256
- Lift height: 100nm