-
chemical_compound small_scan BFO suspended_graphene TappingMode Piezo Carbon Ecoli IndiumTinOxide BoronNitride strontiu_titanate PANI PpLdpe amplitude_modulation StrontiumTitanate GalliumPhosphide OpticalModulator Reading ForceVolume AdhesionEnergy nanobar C_AFM FrictionalForce dielectric trench ForceVolumeMapping ThermalConductivity BaTiO3 CP-AFM rubber Lanthanum_aluminate LifeScience epitaxy Neodymium Chromium BiFeO3
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
HfO2 into Indium Tin Oxide Film
ITO film on 1% HfO2-doped Yttria-stabilized Zirconia (001) orientation grown by pulsed laser deposition. Surface segregation of HfO2 into ITO film.
Scanning Conditions
- System: NX10
- Scan Mode: Non-contact
- Cantilever: AC160TS (k=26N/m, f=300kHz))
- Scan Size: 10μm×10μm,5μm×5μm
- Scan Rate: 0.6Hz, 1Hz
- Pixel Size: 256 × 256, 256 x 256
- Scan Mode: Non-contact
- Cantilever: AC160TS (k=26N/m, f=300kHz))
- Scan Size: 10μm×10μm,5μm×5μm
- Scan Rate: 0.6Hz, 1Hz
- Pixel Size: 256 × 256, 256 x 256