-
Change Pvdf Heat oxide_layer Co/Cr/Pt H-BN Topography fluoroalkane PolyStylene Beads temp hard_disk InorganicCompound align Neodymium CompactDisk GlassTemperature PpLdpe molecules Melt medical Pipette Ito IIT-chennai CuFoil PiezoelectricForceMicroscopy semifluorinated_alkanes Hexylthiophene Nickel Resistance ForceVolume MLCC PatternedSapphireSubstrat MagneticForceMicroscopy Regensburg
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
Christmas Ball Lithography on Si
Create oxidation layers on bare Si surface using bias mode of lithography.
Scanning Conditions
- System: NX10
- Scan Mode: Lithography
- Cantilever: AD-40-SS (k=40N/m, f=200kHz)
- Scan Size: 40μm×40μm
- Scan Rate: 0.5Hz
- Pixel Size: 1024 × 1024
- Tip Bias: -10V for patterened area
- Scan Mode: Lithography
- Cantilever: AD-40-SS (k=40N/m, f=200kHz)
- Scan Size: 40μm×40μm
- Scan Rate: 0.5Hz
- Pixel Size: 1024 × 1024
- Tip Bias: -10V for patterened area