-
Iron fifber lithography cannabidiol electrospinning H-BN ReflexLens TungstenThinFilmDeposition PVAC MultiLayerCeramicCapacitor PhaseImaging India Water Permalloy ElectrostaticForceMicroscopy light_emitting LDPE KevlarFiber Adhesion PvdfFilm Mfm cross section IndiumTinOxide Polyimide Typhimurium ito_film medical Chloroform Electical&Electronics LifeScience PinpointPFM Etch UnivMaryland oxide_layer Metal
Report image
If you found this image unacceptable, please let us know. We will review your report and take action if we determine this image is really unacceptable.
HOPG
Scanning Conditions
- System: NX20
- Scan Mode: FM-KPFM
- Cantilever: qpBioAC AuCB1 (k=0.3N/m, f=90kHz)
- Scan Size: 10μm×10μm
- Scan Rate: 0.5Hz
- Pixel Size: 512 × 256
- Scan Mode: FM-KPFM
- Cantilever: qpBioAC AuCB1 (k=0.3N/m, f=90kHz)
- Scan Size: 10μm×10μm
- Scan Rate: 0.5Hz
- Pixel Size: 512 × 256