| お問い合わせ

New 3D-AFM for High Resolution Sidewall Imaging

Limitations of Conventional 3D AFM

 

07-new-3d-afm-high-resolution-sidewall-imaging-1

Flare Tip

 Flat and very wide bottom portion of the tip (>100nm)
 Unable to produce detailed image of sidewalls
 Limited accessibility to significant undercut samples
 Slow scan rate & low resolution

07-new-3d-afm-high-resolution-sidewall-imaging-2

Tilted Step-in Tip

 Essentially tilted piezotubescanning both XY & Z
 Point by point mapping
 Low & limited resolution due to “step-in” approach
 Very slow scan rate

 

Innovative XE-3DM Technology Overcomes the Challenges

07-new-3d-afm-high-resolution-sidewall-imaging-3

High Resolution Access to Undercut and Sidewall

 Two independent XY and Z flexure scanners for sample and tip
 Z-scanner tilted sideway from -38o to +38o
 Access to overhang sidewall
 Use of normal high aspect ratio tips for high resolution imaging

 

Image of Undercut Overhang: Metal Overhang Structure

07-new-3d-afm-high-resolution-sidewall-imaging-4

 

3D View of High Resolution Sidewall Scan

Complete 3D Metrology of Sidewall
 High Resolution Sidewall Roughnesss Measurement
 Critical Angel Measurement of Sidewalls
 Critical Dimension Measurements of Vertical Sidewalls

07-new-3d-afm-high-resolution-sidewall-imaging-5

 

Sidewall Roughness Measurement

07-new-3d-afm-high-resolution-sidewall-imaging-6

 

Undercut & Sidewall Characterization

07-new-3d-afm-high-resolution-sidewall-imaging-7

- Need to measure the sidewall roughness, angle and the width of bottom, middle, and top
- Characterization of soft photoresist surface by non-destructive imaging

 

Challenges in Accessing Sidewall

07-new-3d-afm-high-resolution-sidewall-imaging-8

Conventional AFM cannot get access to the sidewall, especially for overhang features

07-new-3d-afm-high-resolution-sidewall-imaging-9

Other methods, such as the flare tips, are insufficient in obtaining the high resolution details of the sidewall due to its dull tip. For a deeper overhang, the bottom width cannot be reached at all.

 

For Undercut Characterization and Sidewall Metrology

Continuing the company’s impressive track record of developing optimized solutions, Park Systems introduces XE-3DM, an automatic AFM which revolutionizes the way trench, overhang, and undercut features are scanned and analyzed. The new XE-3DM also makes possible to image soft photoresist structures without deforming or damaging it.

07-new-3d-afm-high-resolution-sidewall-imaging-10

Advanced Inline Automation
- Automated reference marker detection
- Automatic Data Acquisition and Analysis of Trench, Overhang, and Undercut

Features
- High Resolution Access to Undercut and Sidewall
- Non-Destructive CD and Sidewall Measurements by True Non-Contact Mode
- Soft Photoresist Structures Can Be Imaged Non-Destructively
- Critical Angle Measurement of Sidewalls
- Automatic Tip Exchange (optional)